AvMap EKP III C Guide d'installation télécharger pdf (Page 33)

www.avmap.it

AvMap Portable Glass Cockpit system - Installation guide

Autopilot installation

1) Direct Connection - USB interface

Instructions:

1.Plug the EKP V Power cable

into the cigarette lighter socket.

2. Connect the female USB

connector of the EKP V Power

cable to the USB-Serial cable

male USB connector.

3. Cut the serial interface cable.

4. Connect the white RXA wire

of the serial interface cable to

the Autopilot DB connector

labeled as TXA.

5. Connect the yellow TXA wire

of the serial interface cable to

the Autopilot DB connector

labeled as RXA.

6. Connect the black GND wire

of the serial interface cable to

the Autopilot DB connector

labeled as GND.

EKP V power cable

Included in the box

USB – Serial cable

Optional

Serial Interface cable

Optional

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Pas de commentaire

AvMap EKP III C Guide d'installation Page 33